[. . . ] Do not position the appliance on or near hot surfaces or open flames such as hotplates or gas rings. Always remove the plug from the wall socket - after use, - in case of any malfunction, - before cleaning the appliance. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. Children should be supervised to ensure that they do not play with the appliance. [. . . ] No responsibility is accepted if damage results from improper use, or if these instructions are not complied with. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Anti-scale filter A special filter in the reservoir softens the water and reduces the build-up of lime deposits in the sole plate. Filling with water Fill the water reservoir before using the steam function or the spray nozzle. – This iron is to a large extent resistant to hard water (up to 15º dH). Although normal tap water may be used, it is better to use distilled, demineralised or decalcified water. Should you be unsure 10 about the hardness of the water in your area, please enquire of the relevant local authority department. It should be opened only once the temperature level required for steam ironing [as indicated on the temperature control knob] has been reached. €“ Fill the water reservoir using the measuring cup provided to the indicated Max level only. €“ Close the filling hole, ensure that the cover is heard clicking into place. For optimum steam output, wait about 4 seconds before using this function again. The steam jet function may also be used with the iron held vertically, to remove creases or wrinkles from fabrics. Note: For a more powerful steam jet, set the steam control to ‘dry ironing’. Using the dual spray nozzle The laundry can be dampened by pressing the spray button. This will help to smooth out difficult areas, and may be used at any temperature during dry or steam ironing. General care and cleaning Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water. €“ If necessary, the unit may be wiped with a dry lint-free cloth. €“ Starch, fat and other deposits on the soleplate may be removed by wiping with a damp cloth. Self-cleaning system The self-cleaning system flushes out loose mineral deposits and keeps the appliance free of lime and dust particles. Self-cleaning should be carried out if the iron has not been used for an extended period, or otherwise every 10-15 days. [. . . ] €“ Press and hold the SELF CLEAN button while swinging the iron lightly to and fro until no more steam or hot water is emitted. €“ Allow the sole plate to cool down before cleaning it with a damp, lint-free cloth. Storage Turn off the iron, remove the plug from the wall socket and let the unit cool down completely. €“ Pour any remaining water out of the reservoir through the water filling hole. [. . . ]